Shanghai Lijia Technology Co. Ltd. -

Shanghai Lijia Technology Co. Ltd.

Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]

twin wire single arc submerged arc welding tractor
Specification: ZDH
Detail: Characteristic£º 1.The tractor runs steady,with wide welding range,welding at the same time with two welding wires. 2.It is easy to be regulated,the welding head and torch lifting and swirling together at the same time. 3....

mz standard tractor
Specification: ZDH
Detail: MZ-Zkautomatic submerged arc welding tractor can automatically weld under the protection of flux with general dropping characteristic welding power source,slowdown characteristic welding power source,constant-voltage welding s...

mu surfacing with bandelectrode welding machine head
Specification: ZDH
Detail: Surfacing with band-electrode welding is a build-up weld method using the metal strip with a thickness of about 4-8mm and width of about 25-120mm as electrode instead of welding wire. The welding bead of the build-up weld is s...

a2-1 standard overhung submerged arc welding machine head(saw)
Specification: ZDH
Detail: Building block design,all the parts can be easily removed to meet kinds of requirements for the customers. With 100mm¡Á100mm standard electric cross drive,a wide regulating range and the position of the welding torch can be ...

the mechanic anti-floating turning roll
Specification: ZDH
Detail: Workpiece¡¯s production error:such as the ellipticity error and the barrel¡¯s taper error; The turning roll¡¯s position error makes high-low difference and concentric position difference between the driving and following tur...

the turning roll
Specification: ZDH
Detail: The turning roll is a machine that revolves the workpieces,by means of friction between workpiece and driving wheel, or between the supporting ring of non-round workpiece and driving wheel. Our co***ny adopts AC motor to dri...

horizontal rotating table
Specification: ZDH
Detail: The welding horizontal rotating table is a welding positioning equipment used to rotate the workpiece around the vertical axis,the rotating speed of the working stable is not adjustable,which is mainly used to the welding,over...

hl positioner
Specification: ZDH
Detail: HL positioner is composed of tailstock,swirl gear,worktable,turnover mechanism and body. The surface of the worktable is manufactured by casting,which is difficulty terval among them on the table,which are convenient to ...

the positioner
Specification: ZDH
Detail: The positioner is an ideal equipment used to welding various rotating part such as shaft,shallow and barred part,through the rotary motion and flip flop of the working table,making the weld of the work pieces at their most ide...

the handing hachine
Specification: ZDH
Detail: The handing machine is usually composed of column(including lifting gear,sliding part,falling protcting safety and counterweight part),transom(including gear rack and transom driving part),electric/manual swirl gear,and pneuma...


Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2